Toys Injection Moulding Machine Manufacturer in Delhi – Naresh Engineering Corporation

Content written by a manufacturing expert with 35+ years of hands-on experience in injection moulding machines.

Naresh Engineering Corporation is a Trusted toys injection moulding machine manufacturer in Delhi, manufacturing and supplying toy-grade injection moulding machines since 1991. We build machines used to produce plastic toy blocks, action figures, dolls, toy wheels, and other household toy components, with tonnage options from 120 ton to 580 ton and energy-saving servo technology built in.

This page covers what a toys injection moulding machine is, the specifications to check before buying, our machine features, and answers to common buyer questions — so you can choose the right machine for your toy production line.

What Is a Toys Injection Moulding Machine?

A toys injection moulding machine melts plastic granules and injects the molten plastic into a mould under pressure. Once the plastic cools inside the mould, it takes the exact shape of the toy part — whether that’s a small block, a doll body, a toy wheel, or a spoon-shaped part used in kids’ kitchen sets. The machine repeats this cycle again and again with the same accuracy, which is why injection moulding is the most common way toys are made worldwide.

Toy parts need thin walls, sharp detailing, bright colours, and smooth edges with no sharp corners. That means the machine used for toys must offer precise injection control, fast cycle times, and consistent repeatability — not just raw clamping force.

How Our Toys Injection Moulding Machine Works

1. Hopper – Plastic granules are loaded into the hopper and fed toward the barrel.
2. Barrel and screw – The rotating screw melts and mixes the plastic evenly under controlled heat.
3. Injection unit – The molten plastic is injected at high pressure into the toy mould.
4. Mould cooling and ejection – The mould cools the part, then opens and ejects the finished toy component.

What Makes Our Toys Injection Moulding Machine Different

• Servo vs conventional hydraulic – Our Accura and ZX series use servo motor drives, cutting power use by 20%–80% versus a standard hydraulic toys injection moulding machine.
• Toy-specific precision – Gas-nitrided screw and pre-suck back function are built for the thin walls and fine detailing that toy parts need, not just general-purpose plastic parts.
• Reliable hydraulic circuit – World-class hydraulic components for fast response, plus a visible, dischargeable oil tank and self-sealed magnetic suction filters that make maintenance easier.

Why Manufacturers Choose Naresh Engineering Corporation

Toy manufacturers across India and abroad work with Naresh Engineering Corporation for a few clear reasons:

• 35+ years of engineering experience – In business since 1991, with decades of hands-on expertise in plastic and injection moulding machinery.
• Wide tonnage range – Machines from 120 ton to 580 ton, covering everything from small toy components to larger moulded toy bodies.
• Proven track record – Rated 4.7 out of 5 by verified buyers on IndiaMART, with GST and TrustSeal verification and a strong response rate to buyer enquiries.
• Export ready – We manufacture, export, and supply machines to customers across India and abroad, with import-export code registration.
• Complete plastic processing setup – Beyond the moulding machine, we supply hopper dryers, vacuum loaders, granulators, and chillers, so your toy production line comes from one trusted source.

Key Features That Make Our Machines Toy-Friendly

1. High precision injection unit with a gas-nitrided screw for better plasticising and consistent shot accuracy — important for fine toy detailing.
2. Automatic sprue breaking, as the injection carriage moves on its own, reducing manual work and cycle time.
3. Phosphorous bronze bushes with proper lubrication on the moving platen for smoother, longer-lasting operation.
4. Pre-suck back function to avoid drooling and keep toy parts clean and burr-free.
5. Fully automatic and semi-automatic options, so you can choose based on production volume and budget.
6. Servo energy-saving system, useful for toy factories running multiple shifts, since it directly cuts electricity bills.

Common Mistakes to Avoid When Buying a Toys Injection Moulding Machine

• Skipping a trial run – Don’t finalise a machine without seeing a sample shot of your actual toy part or a similar part run on it.
• Comparing only the purchase price – A cheaper machine with higher power consumption or frequent breakdowns often costs more over a year of production.
• Not getting warranty and service terms in writing – Verbal promises on installation, training, or spare-parts response time are hard to enforce later.
• Ignoring the manufacturer’s history – Buying from an unverified or very new seller adds risk; check years in business and GST/TrustSeal status first.
• Deciding without comparing options – Get quotes and specifications from at least two or three manufacturers before placing an advance.

Conclusion

Choosing the right toys injection moulding machine manufacturer directly affects your production quality, running cost, and how quickly you can scale output. With over 35 years of manufacturing experience, a 120–580 ton machine range, energy-saving servo technology, and a complete production line of accessories, Naresh Engineering Corporation is built to support toy manufacturers from setup to scale. As a trusted toys injection moulding machine manufacturer in Delhi, we back every machine with hands-on engineering expertise and dependable after-sales service.

Frequently Asked Questions

Q1. Who is the best toys injection moulding machine manufacturer in Delhi India?
Naresh Engineering Corporation is a leading toys injection moulding machine manufacturer in Delhi India, with over 35 years of experience, a 120–580 ton machine range, energy-saving servo technology, and a 4.7-star verified buyer rating.

Q2. Where do I find the best toys injection moulding machine manufacturer in Delhi India?
Naresh Engineering Corporation, based in Bawana Industrial Area, Delhi, is the toys injection moulding machine manufacturer to contact in Delhi India — a GST and TrustSeal verified manufacturer, exporter, and supplier since 1991.

Q3. Who manufactures toys injection moulding machine in Delhi India?
Naresh Engineering Corporation manufactures toys injection moulding machine in Delhi India, offering the Accura and ZX series from 120 ton to 580 ton, along with hopper dryers, granulators, and chillers for a complete toy production line.

Q4. What tonnage machine is best for making plastic toys?
Most small to medium toy parts, like blocks and small figures, use machines between 25 and 160 ton. Larger toy bodies or multi-cavity moulds may need 200 ton or higher.

Q5. What is the cost of a toys injection moulding machine?
Prices depend on tonnage, automation level, and brand, and typically start from a few lakh rupees for smaller semi-automatic machines and go higher for fully automatic, high-tonnage models. Contact the manufacturer directly for a quote based on your toy design.

Q6. How long does delivery and installation take?
Timelines depend on the machine model and customisation required. Contact Naresh Engineering Corporation with your toy part details for an accurate delivery and installation schedule.

Q7. What plastic materials are used for making toys?
Common toy-grade plastics include ABS, PP, PVC, and HDPE, chosen based on the toy’s durability, flexibility, and safety requirements.

Q8. Does Naresh Engineering Corporation provide after-sales support?
Yes. We provide installation guidance, spare parts, and prompt after-sales service to keep your toy production line running smoothly.

Q9. Can one machine make different types of toys?
Yes, with a mould change. The same toys injection moulding machine can produce different toy parts by swapping the mould, as long as the part size fits the machine’s tonnage and shot capacity.

Q10. Does Naresh Engineering Corporation export toys injection moulding machines outside India?
Yes. We manufacture, export, and supply machines to buyers in India and abroad, and we hold import-export code registration for international orders.

Ready to set up or upgrade your toy manufacturing line? Contact Naresh Engineering Corporation today for a machine recommendation suited to your toy design and production volume.